The New Generation of ePTO. The Big Difference

A power take-off or PTO is any of several methods for taking power from a power source, such as a running engine, and transmitting it to an application, like the hydraulics for a bucket lift. 

Ground Zero 

PTO’s have been around for a long time. Experimental versions were invented as early as 1878, while even before then there were other ways to transfer power from a running engine. Before the modern PTO, either the engine remained stationary, or the device only worked while the vehicle (in most cases a tractor) was actively moving, and was typically attached to the wheel. It was only until the first true PTO was invented, that we were able to proficiently utilize a drive train to operate equipment that didn’t slip, was easily connected and disconnected, and operated while the vehicle was making turns. It was these motivations that brought about the first ever commercial PTO. 

Early PTO’s 

It wasn’t until 1918 when International Harvester Company (IHC) introduced the first commercial tractor PTO, the model 8-16, that they became a documented technology. Edward A. Johnston, and engineer for IHC, noticed the clever enginuity of the farmers who had fashioned their own PTO’s in the hills of France and sought out to create a production model. After its release, it would only be another year before other competitors sprang up in a new race to satisfy consumers in the agricultural industry of the 1920’s. With that came the birth of the first generation of PTO’s. 

Live PTO’s 

At this point a PTO’s installation in a transmission determined if the PTO could run independently of ground speed, or how fast the vehicle was traveling. Early on this was taken from the main output shaft, requiring the vehicle be in gear to operate. “Live” PTO’s were able to control the PTO’s rotation independently of the motion of the vehicle. This way the tractor could slow or stop while still running equipment. In 1945, Cockshutt Farm Equipment Ltd introduced the Cockshutt Model 30 tractor with LPTO and to this day the technology has remained fairly similar with most modern PTO’s considered to be “live.” 

The Electric PTO (ePTO) 

Oddly enough, the battery was invented before the PTO, but it wasn’t until decades later that people started attempting to electrify PTO’s for the sake of saving fuel. Once western culture became more environmentally aware in the early 90’s, ePTO’s finally started getting the attention they deserved, but the progression of batteries would serve to be an obstacle in their adoption. 

First Generation ePTO’s 

It wasn’t long before people realized they could use battery power to operate PTO’s independently. In the early days of ePTO’s there was quite a bit of variety in architecture and battery chemistry. Most models weighed in at an unmanageable 1,500 lbs or more. They were also expensive with hefty price tags up to 100k and were largely unreliable. They had to be deeply integrated into the vehicle so much so that if the ePTO failed, the truck or tractor was put out of commission until the problem was resolved. This complicated a goal that was originally pretty valid; improving the environment through emission reduction. 

It was all just too expensive to be worth it. Downtime related costs including repair, replacement vehicle, rentals, and loss of productivity could sometimes reach the initial unit cost of 60k or more, and the cost fell right in the customers lap. Most fleet managers shared negative experiences in this first rendition, experiencing hardware issues and fires along side lofty costs. Some companies were forced to close, evolve or sell those divisions to mitigate losses. All this was enough to leave a bad taste in the industry’s mouth despite the unit’s still being safer for crews and the environment. 

ePTO’s had yet to really stick… 

Second Generation of ePTO’s 

After the turn of the millenium, concerns for climate change were mounting and generations of Americans were now old enough to bring it to the forefront of legislation and culture. By 2013 Lithium Iron Phosphate battery technology was allowing us to reevaluate the stability ePTO’s and the industry was cautiously ready to give them another shot. What came from this was a more reliable version of the utility. Though even such a short time ago, lithium batteries were still pretty heavy, and rather expensive, taking as long as 10 years for savings payback under reasonable total cost of ownership models, and the units were also still deeply integrated affecting resale value. They also still risked taking your truck out of commission if they failed, averaging between $50,000 and $80,000 for a unit large enough to operate a bucket truck boom, bucket, or winch for a full workday. Annual fuel and maintenance savings, assuming no unexpected downtime, should have been around $4,500 to $9,500 annually, however, getting your money back on the investment still took longer than the average utility truck’s lifetime in a commercial setting. Things were improving but not enough to revive most fleet managers from the avoidance of the product they had developed from experiences with the first generation. The product was still lacking. 

SmartPTO, Third Generation ePTO 

Finally today, the new generation of ePTO solves these problems. Like previous models work can be done in a quieter, safer environment where ground crews can communicate freely, but now, modernized lithium batteries cost $7,500 less on average and weigh a lot less with the unit at a grand total of 500lbs on average. Superiorly reliable, 3rd gen ePTO’s rarely fail and are truly parallel, meaning they can be deactivated to restore normal PTO use. They are easily transferable from one truck to another with a one to two day installation time simply because rather than powering the drivetrain of the vehicle, SmartPTO plugs directly into the hydraulic system, improving efficiency and making it easier than ever to retrofit existing fleets. This creates an average annual savings potential of up to $9,000, and a savings payback of typically less than 4-5 years. Onboard telematics software allows for tracking, diagnosis, and raw data from the field, pushing updates and performance adjustments remotely. The cost has also been improved with a price tag under 40,000 for most installations, boasting nearly $80,000+ in lifetime savings per unit, and reducing maintenance costs by 69%. 

So then, the special ingredient in calling an ePTO “3rd Gen” is it’s modular nature, and SmartPTO is the first of its kind. Developed by Viatec, it has a proven electric motor with over a decade of testing and two million dollars worth of research behind it. Watch the demo video below to learn more 

You can learn more about SmartPTO by watching our explainer video.

Video

Install SmartPTO today!

Contact Us